Change a till roll on a Barclaycard card machine

Change a till roll on a Barclaycard card machine

When your till roll runs out, replacing it is simplicity itself.

  • Step by step guide

    Card machine till rolls

    1. Before you get started

    You can’t replace an old till roll unless you’ve got a new one. You can order till rolls from our approved supplier, PDQ consumables, on 0844 822 2044 or pdqconsumables.com .

    Be sure to order the right ones, though. Your card machine can only hold paper rolls that are 57mm wide and 40mm in diameter. If you try to put the wrong size of till roll in your card machine, you could break it.

    How to open the printer cover

    2. Open the printer

    Pick up your card machine with one hand, and use two fingers of your other hand to lift and open the printer cover.

    How to remove the old till roll

    3. Discard the old roll

    Pull the old till roll from your card machine and throw it in the recycling.

    How to prepare the till roll

    4. Prepare the new roll

    Grab the new till roll and peel away the end of the paper.

    How to insert the till roll

    5. Insert the new roll

    Carefully place the till roll into the printer compartment of your card machine. Remember, the end of the paper roll must face upwards and point away from the keypad.

    How to close the printer cover

    6. Close the printer

    Hold the end of the till roll up, then close the printer cover so that it is sticking out. Push the printer cover firmly until you hear the lock click.

    When you’ve done this, your card machine displays READY.

    Ready to print receipts

    7. Check the paper feed

    Press and hold the CLEAR button to check the paper feeds correctly, and doesn’t get jammed.

    And you’re done